Why is my bosch dishwasher not working

This should be at the top of the list when it comes to checking all electronic devices. For them to operate, they must be receiving power, and hence the power knob should be on. If you are uncomfortable checking on connectivity, then you can contact a licensed technician to check this out for you.

You should, therefore, be very careful when checking the wiring. If you do not have the skill and experience to make appliance repairs then please call a professional dishwasher repair enginee r.

The primary purpose for a door latch in a dishwasher is to ensure there are no water leakages from the machine. The door latches are usually fitted with switches that are designed to control the device when a door is opened.

What they do is that they turn off the machine whenever the door is opened. Therefore, to have your dishwasher working, you need to disarm the switch altogether. This is achieved by ensuring the door is closed firmly hence activating the door latch. It is important to note that the dishwasher can only work when the door is closed and latched. If, it is open, it will not work due to the switch.

The door switch is made up of terminals that enable it to function. Due to being exposed to water over a long time, the terminals may become corroded. When this happens, it will deter a proper electrical connection hence affecting the turning on of the dishwasher.

Inadequate Water Supply Sometimes a water supply issue can be the cause of a Bosch dishwasher not starting. Our dishwasher repair service can help identify which of these common parts has failed: Faulty thermal fuse : when this fuse blows it shuts off power to the dishwasher, preventing it from overheating. If the thermal fuse is blown it needs to be replaced. A defective timer requires replacement.

If the control board has malfunctioned, there may be insufficient power to start the dishwasher and it needs to be replaced. We Accept Paypal Credit. Model Number Locator. Recent Posts. This Could Be Why. October 8, Wall of Fame. Corporate Headquarters. As Seen on Good Day!

Get Social. A Bosch dishwasher dues not fill with water if the previous cycle was interrupted. Reset the dishwasher by pressing and holding the "Start" button for at least three seconds. Depending upon the Bosch dishwasher model you have, you also can push the "Cancel-Reset" button to reset the dishwasher. Select a new cycle and press "Start. Check the water supply feed line underneath the sink.

If it was turned off for any reason and mistakenly left off, the dishwasher cannot fill with water, even though the unit comes on. Look for a kink in the water supply line. If you find one, shut off the water valve, and remove the hose and kinks. Reattach the water supply hose and turn on the valve. Most Bosch dishwashers contain a small filter inside the hose end to prevent sediment from your water supply getting inside the dishwasher.

With the water supply hose disconnected, remove the filter from inside the hose, clean it thoroughly to remove any iron buildup or sediment, and replace. Reinstall the hose line and reopen the water supply valve. Verify you have enough water pressure to run the dishwasher. Grab a 1 gallon container and turn the faucet on to fill it.

If you have enough water pressure to run the dishwasher, the container should fill up within 30 seconds.