Which bayonet for ar 15

This standardized bayonet design made training, equipping, and maintaining bayonets in the field significantly easier when new bayonets were issued.

Far from just being a desire to standardize, the US military bayonet design that the M7 is based on has been combat proven for decades with no compelling reason to change what works. One of the most interesting things about military weapons is their ability to accept accessories.

The one accessory that every owner of a military style firearm should own is the bayonet that would be issued with their rifle. Those who collected during the "Assault Weapon Ban" will remember the ban on bayonet lugs and how ridiculous it felt to ban this feature that was rarely ever used and never used in a crime.

Now that you can have your choice of firearms with bayonet lugs, you need to ensure you have bayonets to fit them all. The M7 bayonet is a great choice as it will fit any AR15 style rifle that has a bayonet lug as well as the Mossberg shotgun that is issued to the US Marines.

View Product. Items 1 to 13 of 13 total. You submitted your review for moderation. Checkout or View and Edit Cart. M7 Bayonet with Scabbard. The M7 Bayonet was the work horse bayonet of the US military from the time it was released with the M16 rifle in There are still units using the M7 even though it was partially replaced by the M9 bayonet in Notify me when this product is in stock.

I thought they actually didn't make a Bayo for the current issued M4's? All the Bayo's out there were made for M16's and the old three prong fash hiders? Quote History. Quoted: I thought they actually didn't make a Bayo for the current issued M4's? OP: It sounds like your muzzle device maybe a postban-era muzzle brake, deliberately made to federally not allow drive-by bayonettings between September and Spetember Places like NY are still safe from such atrocities because they maintain such a ban at the state level.

Quoted: You say they won't fit over the flash hider? Quoted: that trple r affair looks complicated and pricey. Quoted: Two separate issues here, first, if you have a 16" barrel the bayonet will not have a long enough handle. Second, if you are purchasing the ebay M7 bayonets made in China, they are shipped with a ring that is too small to fit over a flash suppressor. There are also several vendors that sell this crap. View Quote View All Quotes. Yes I have an M4 with a mid length gas tube so it should fit I think I am useing the wrong series of bayonet This device promotes social distancing.

Some companies make an adapter to correctly mount a bayonet to a inch carbine barrel. The one I bought is made by Triple-R products and functions as a simple extender for the lug. It is meant to be attached and left on the rifle. It looks a little goofy, but it is made of blued steel and seems robust. My primary critique is that it had a lot of sharp edges and corners. But I want the bayonet sharp and the mount smooth, so I spent about an hour filing and sanding it down and rebluing it.

A quick-release model is also available. It seems solid. We shall see. Without the extender, the bayonet muzzle ring would rest on the thin barrel- not very effective. But there are problem guns with no easy answer. What about a short-barreled AR pistol, or a dissipator style rifle with a front sight base all the way out towards the muzzle?

Some companies make a short bayonet handle to fit these firearms, but they look flimsy to me. I suggest you get a decent bayonet and cut it down to fit if you have the skills. I think the best way to mount a bayonet to these rifles is just to create a blade that mounts directly to the handguard without using the lug feature at all. In the meantime, I hacked up a spare front sight base to get the barrel ring with the lug and then drilled and tapped it for three set screws.

It now serves on a rifle with a low profile gas block and a free-float handguard. A problem gun: how do you mount a bayonet to a A problem rifle: How do you fit a bayonet on a free-floated rifle with low profile gas block? I cut off the barrel ring with the lug from a standard front sight base and drilled and tapped it or three set screws. It works, But if someone would make a lug or a blade that mounts directly to the handguards, that would be better.

If you want to buy a bayonet for an AR rifle, I suggest getting a surplus M7 bayonet. Even eBay and Amazon have them. Occasionally new knockoffs can be found for less, and maybe less quality too. Once baked the canister will be ready for use again. This recharge process can be done indefinitely. Case is made to withstand hard impacts. Stainless steel added to padlock points for added security. Orange peel texture molded into the exterior finish minimizes scratches. Structural ribs added to the outside for increased durability.

Wide bodied snap latches can be used with gloves. Built-in lid stay so the lid will stay upright when open. Manual pressure release valve in the front allows you to equalize the atmospheric pressure when traveling to different altitudes.

Legal for rifle storage in all 50 states. Drawstring waist and hood.