Is it possible to convert dvi d to vga

When you test your cables, it is recommended that you do the following: Test each cable individually. Use short cables when you are testing. When you test the video source and video destination, it is recommended that you do the following: Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

The monitor is not getting a signal and there is no error on the monitor. What do I do? Check that the cables between the source and the destination work with other equipment. Check whether the video adapter works with another source and another destination. Does this device also convert in the opposite direction? Is this an active or passive converter and what is the difference?

This is an active video signal converter. Safety Measures If product has an exposed circuit board, do not touch the product under power. If Class 1 Laser Product. Laser radiation is present when the system is open. Cables including power and charging cables should be placed and routed to avoid creating electric, tripping or safety hazards.

Customer Reviews 7 reviews 3. Tell us what you think of this product. Write a review Need a little help getting started? Check out our review guidelines. Works as promised. Comment Helpful? Yes - 2 No - 3 Report. I'm sorry ,myself and tech pro, could not get this item to pass a signal at all.

Yes - 2 No - 8 Report. Barry W. Hi, We're curious about the issue your having and would like to get more detail from you. There are not any special requirements for this product other than being sure you are connecting your DVI-D source to a VGA display, and not the opposite direction. Please contact us at or email us at support. We are curious if there was ever a resolution to this.

I work for a company that uses these for many devices, after a recent thin client upgrade these devices stopped working. HP is no help Yes - 0 No - 0 Report. After searching all around my city and spending some serious time on the intertubes, I finally found a product to do exactly what I need.

As a dvi-d only has a digital output, a lot of the converters confuse you with dvi-i and the other just don't work. This one converts the signal well and you get a crisp image. I am running a KVM switch across two computers and two monitors and this product fits in well. Yes - 4 No - 0 Report. Good product but the screen flashes all the time and when i am playing a game the screen is unusable. Yes - 1 No - 1 Report. The first VGA monitor I tried displayed "out of range" and would not work at all.

The second VGA monitor I tried different model than first one gave "out of range" while PC booted up but then gave an excellent picture once Windows login screen appeared. The third VGA monitor I tried different model than the other two would not diplay the BIOS boot information like the other three, but gave me the Windows splash screen while loading and finally the login screen.

Unfortunately, there was a thick, black, bar across the screen about an inch from the top that split the screen such that the task bar was up top above the black bar but not accessable with the mouse.

Changing screen options did nothing. So, it only worked with one out of three displayes so far and with that display it's just fine. I call it transition because they were common 7 years ago. The processor could do Analog and digital signal. This connectors would be DVI-D. The idea was that the signal is Digital, but you could use an adapter and then it would send analog.

Here is where your adapter would work. I have a few machines at work, where the adapters work. Depending on the motherboard is what connectors you have available. In these motherboard you can only do 2 displays if you use 1 of the digital ports and the VGA.

So in the end only 1 work. To be completely honest, it is not the the adapter seller or manufacturer's fault. There has been confusion about this for a long time. It should be labeled better. So the adapter will work if the header processor can do analog signal. The adapter only re-arranges the pin out to make it compatible. Considering you said it has dual link, most likely the graphics adapter does not have analog processor.

The problem is that I do not want to put nice monitors in the server rooms. Aren't there adapters to convert digital to analog? I am so irritated at the guy that built these things! Tweet Share Email. Was this page helpful? Thanks for letting us know! Email Address Sign up There was an error. Please try again. You're in!

Thanks for signing up. There was an error. Tell us why! More from Lifewire. How to Connect a Projector to a Computer. How to Connect a Fire Stick to a Projector. How to Connect a Dell Laptop to a Monitor. How to Connect a Laptop to a Projector. DVI vs.