Why do faucets cost so much

The woman there said to be careful of cheap faucets because some of the parts inside are plastic, not metal and ceramic. I have heard that same thing from three contractors we consulted. This time around I am going to pay more for a faucet that doesn't leak. But man, they sure can be expensive! Brickton - I looked at the Moen Lindley a few weeks ago and really liked the look. How do you like it - is the water power strong while using the pull down and is the pull down a true pull down or more like a pull out?

I was looking at the stainless steel finish. I'm a bit embarrassed to admit how far away from installing the faucet we are.

Suffice to say it hasn't had water flowing through it yet It was a good deal on the faucet we wanted so I picked it up. I like the look and the weighty feel of it, but that's about all I can tell you. I kept on going back to that one everytime I went faucet shopping so I figured I would bite the bullet and buy it already!!

I didn't get it at the great price you did, but the Home Depot price is pretty inexpensive compared to the other faucets I was looking at. My father, who could really be a cheapskate sometimes, would never buy a cheap faucet. He would always buy something a little better.

Maybe you don't need a very expensive faucet, but do consider something mid-range. OTOH, in the grand scheme of a kitchen remodel, a faucet is something you use multiple times per day, so perhaps getting the one you want with quality is worth it.

There is never a shortage of choices on Ebay for new faucets either, at least when I was looking. I agree it seems like plumbing is expensive. But keep in mind the Faucet is the work horse of the kitchen. Think about it, How many times are hands washed, vegetables cleaned, pots filled, dishes rinsed off, or even just making some sweet lemonade.

The faucet is probably touched 10 maybe 50 times per day. You want a good quality faucet that will stand the test of time, handle little hands or old ones using it while in the kitchen. I know, they can be pricey but you can find a fairly good quality brand that can last 10 years. Keep searching and maybe you can find the Vinnatta or another that is a fair price. I don't even think we had the paperwork because ours was a new build and builder didn't leave any receipt for it.

They replaced the faucet no problem. It might be worth a try. Here's the Sorry to hop on here, but how do you know if the faucets that sell online are the quality ones or if they have plastic parts inside? I think the article I linked to addresses this, or I read it somewhere else on here but the best way to know if you have the cheap version of a faucet is to read the model number. If the model numbers match two faucets are exactly the same.

So if site A list a faucet as all metal construction, brass this, cermaic that, and site B has the same model number faucet for less then they are the same. I think the article specifically references Big Box stores having 'their own version' of some faucets. The faucet would have a different model number that calls it out as varying from others. And again to reiterate, the best deals I've found were in fact on eBay. I'm looking at Price Pfister pullout Parisa or Clairmont and can't tell for sure whether the stem swivels.

I called the company and the guy said 'yes' but he didn't sound too confident. Here is a link that might be useful: Price Pfister Parisa faucet page. My experience is that the cheapest faucets don't perform well over time.

They develop leaks and such. But get to a certain moderate price point and the quality is fine. Those plastic kitchen faucets cost less as this type of material is very cheap. A right kitchen faucet might cost much more than your tight budget.

There are so many other factors that add to its real manufacturing cost when it becomes available in the market. Starting from the materials to designs, every cost is included. You should always consider a number of factors and reasons to consider when buying a kitchen faucet.

There are plenty of reasons which could never be denied while buying an expensive kitchen faucet. Functionality should be a top-notch priority for choosing a kitchen faucet in your home. Buying a cheap kitchen faucet might create problems and may require the necessity to be replaced when it loses its functionality warrantee.

The functionality of a kitchen faucet comes with extra features and abilities to accomplish different tasks at a time. In that case, an expensive kitchen faucet comes up with better functionality than most other cheap kitchen faucets. Most of the finest kitchen comes up with the finest material like steel other than adding new features. As the material has an aftereffect on the functionality of the kitchen faucet, the price keeps increasing.

In addition to the reasons mentioned, there are tons of features for which a kitchen faucet can be expensive. However, you should always compare the quality even for the expensive kitchen faucets. Colour, design, pattern, and style are important factors while installing a kitchen faucet. Anything that is in style never comes at a cheap, and so is a kitchen faucet.

The polished chrome radiates off the elegant handles and spout to give your bathroom a clean finish. The spout reach is 7. The KRAUS brand is one of the top manufacturers of bathroom sinks, and its line of bathroom faucets fits this category. Featuring 5 different kitchen sink finishes, the 1 hole vessel is great for modern bathrooms. The elegantly arched faucet allows the water to get on the hands at a direct angle, helping to minimize splashing and waste.

This faucet has a wide variety of finishes and option packs for the perfect match in your bathroom. This beautiful waterfall faucet is a great modern-looking sink with an expensive finish but for a lower price. Available in two different finishes, this faucet dispenses water in a magnificent way that will astonish your guests. The sleek design allows for water to be dispersed with lever control.

The tempered glass disk creates a dynamic surface for water flow and easy hand cleaning. If you aren't sure whether a fitting is solid brass, pick it up. It should feel heavier than other units. Zinc is the metal beneath most brass- and chrome-plated fittings. Because zinc corrodes when it contacts water, these faucets must be replaced when the plating wears off.

Stay away from low-end faucets with plastic bodies. Finish is another crucial choice that determines not only how a faucet looks but also how easy it is to maintain. An electroplated chrome finish on a brass or zinc faucet looks good and lasts. If you opt for the warmth of natural brass, you'll avoid frequent cleanings with one of the proprietary lifetime finishes that block out oxidation.

Pewter, nickel and satin finishes are also easy to maintain. Their muted tones hide water spots, scratches and fingerprints. They also match door and cabinet handles more easily than brass. Chrome and combination chrome-and-brass finishes are popular for baths but require frequent cleaning to maintain their shine.

With a spectrum of colors available, going with painted or enamel finishes is the easiest way to individualize a faucet and coordinate it with the rest of the bath. But because most of these finishes aren't bonded to the metal like plating, they chip and scratch relatively easily. Save them for less-used powder rooms and guest baths. If you're replacing only the faucets and not the sink, you have to know which size unit to buy. Start by removing the existing faucet and measuring the distance, or spread, between the holes in the lavatory.

Small lavs often have three holes that span 4 in. Your new faucet must be configured the same way. The same holds for single-handle faucets and some two-handle units mounted in a single hole. Lavs with holes 6-, 8- or in. Next, consider who will use the faucet; this factor determines the style you choose as well as the inner workings you opt for. How many handles. Look for a single-handle faucet or one with lever handles for older users or anyone who has trouble turning round knobs.

If you opt for round knobs, look for ones with rotational limit stops, which take just a quarter turn to open and close the valve inside.

Small children have different needs. You hope it's the cold one," says Dale Archer, technical service manager for Hansgrohe, a Cumming, Georgia-based faucet manufacturer. The company suggests single-handle faucets for kids; these aren't likely to be in the full-hot position. You can also find single-handle models that let you adjust the flow mechanism to limit the amount of hot water available.

What kind of valve. Control valves open and close water flow inside the faucet body when you move a handle or twist a knob. There are four kinds, each with its own strengths and weaknesses. Traditional two-handle faucets use compression valves , which control water flow with a rubber washer.